Stained Glass Christmas tree - 4x4 and 5x7
SKU:
£2.25
£2.25
per item
Turn this simple blackwork design into something special by colouring it in with wax crayons or fabric paints. Or use the 5x7 design and stitch onto card to make your own Christmas Cards. The 5x7 includes a placement line for accurate alignment of A5 card.
4x4 Measurements 99mm x 64mm 3.9inches x 2.5inches
Stitch Count 1754
5x7 (including placement line) Measurements 150mm x 105mm 5.9inches x 4.14inches
Stitch Count 2650
Multi Format DST,EXP,HUS,JEF,PES,XXX,VIP
Stitch Credit for Christmas Tree Card - Yvonne Smee
4x4 Measurements 99mm x 64mm 3.9inches x 2.5inches
Stitch Count 1754
5x7 (including placement line) Measurements 150mm x 105mm 5.9inches x 4.14inches
Stitch Count 2650
Multi Format DST,EXP,HUS,JEF,PES,XXX,VIP
Stitch Credit for Christmas Tree Card - Yvonne Smee
To use this design on a card use size A5.
Hoop stabiliser and stitch the placement line. Lightly spray stabiliser with temporary embroidery adhesive. Place the unfolded card on the placement line, making sure the design will stitch the right way up. It should be held in place by the adhesive. Half of the card will be unused. Stitch the design. Remove from hoop and trim the stabiliser. You can cut out a piece of paper to cover over the stitches if you don't want to see the stabiliser.
Alternatively, stitch the design onto fabric, trim along the placement line and glue down to the front of a card.
Hoop stabiliser and stitch the placement line. Lightly spray stabiliser with temporary embroidery adhesive. Place the unfolded card on the placement line, making sure the design will stitch the right way up. It should be held in place by the adhesive. Half of the card will be unused. Stitch the design. Remove from hoop and trim the stabiliser. You can cut out a piece of paper to cover over the stitches if you don't want to see the stabiliser.
Alternatively, stitch the design onto fabric, trim along the placement line and glue down to the front of a card.
